We supply a range of hard Aluminium
Foil suitable for blister packing of Pharmaceutical Products such as
Tablet, Capsules, etc., with the following general specification. The
final product specifications are made as per agreed contact with the
customers.
| Standard Foil
Gauge Options |
Tolerance
( /-8% ) |
| 0.020 mm |
/- 0.0016mm |
| 0.025 mm |
/- 0.002 mm |
| 0.030 mm |
/- 0.0024 mm |
HEAT SEAL COATING : Colourless
Vinyl Resin (option for tinted resin available) conforming to the
applicable Government regulations regarding direct contact with
medicines and drugs. The resin is suitable for heat sealing to PVC/PVDC
coated PVC films.
COATING THICKNESS OPTIONS:
- 4-6 GSM with a tolerance of /- 0.5 GSM
- 6-8 GSM with a tolerance of /- 0.5 GSM Standard, if not
specified, heat sealing coating GSM is 4 with a tolerance of /- 0.5.
SEAL STRENGTH WITH PVC/PVDC: 8 N/25 mm min.
PRINTING AND LACQUER COATING: Printed as per text, layout and
shade approved by customer. For non-printed specification, clear lacquer
to be coated as a protective coating and good printability. Printing
inks and lacquer coatings are capable to withstand 180 deg. C for 1 sec.
dwell time.
CONFIGURATION: Printed and Unprinted Blister Foils are available
in the reel forms. Unprinted blister foils are also available as Jumbo
roll.
| Winding Direction: |
Generally printed or clear
lacquer side is out with heat Seal coating inside. |
| Core: |
Material options: (a) Plastic
(b) Aluminium (c) Card Board |
| Core ID : |
76 mm /- 0.5 mm |
|
The length of the core is
equal to the width of the web. |
| Splices: |
Butt type made with 25 mm
pressure sensitive tape. |
| Reel Outer Diameter: |
250 /- 10 mm for slit
material, 400 /- 10 mm for Jumbos |
| Reel Wander: |
Within /- 1 mm |
| Reel/Web Width: |
Plain: 45mm to 800 mm with a
tolerance of /- 0.5 mm. |
|
Printed: 45mm to 600 mm with
a tolerance of /- 0.5 mm |
| Joints Per Reel: |
Maximum 2. Average less than
1. |
| Pin Holes: |
0.025 and 0.03 mm foils are
free from pin holes. |
|
In 0.02 mm foil, 40% of foil
is free from pin holes, rest less than 10 PSM |
We also supply a range of soft
Aluminium Foils suitable for strip packaging of Pharmaceutical products
such as Tablet, Capsules, etc. With the following general
specifications. The final product specifications are made as per agreed
contract with the customers.
FOIL MATERIAL:
Soft fully annealed aluminium alloy AA 8011 / AA 1200 conforming to
Aluminium Association specification.
| Std Foil Gauge Options |
Tolerance (
/-8% ) |
Min.
Bursting Strength |
| 0.025 mm |
/- 0.002 mm |
1.5 kg/sq. cm |
| 0.030 mm |
/- 0.0024 mm |
1.9 kg/sq. cm |
| 0.040 mm |
/- 0.0032 mm |
2.5 kg/sq. cm |
We
also supply foils of three ply having the following structure:
Polyester / Foil / Poly
This 3 ply is suitable for packing conventional products like
confectionery, tea, consumables etc. The final product specifications
are made as per agreed contract with the customers based on the type of
products that are to be packed. Polyester to foil and foil to poly
lamination is done by dry lamination.
FOIL MATERIAL:Soft aluminum foil made from alloy AA 1200 / AA
1235 / AA 8011 conforming to Aluminium Association specification.
The quality of foil is as per our light gauge foil specification.
POLYESTER:
| Standard Thickness
(micron) |
Tolerance (±
10%) |
| 10 |
± 1 |
| 12 |
± 1.2 |
POLY: Colorless poly conforming to the applicable Government
regulations as a sealant layer.
| Standard Poly Thickness
(micron) |
Tolerance (±
15%) |
| 37.5 (150 gauge) |
± 5.625 |
| 25 (100 gauge) |
± 3.750 |
| 45 (180 gauge) |
± 6.750 |
|
Technical Specification
©
Karishma Pharma Machines/Karishma International. All Rights
Reserved (Terms
of Use)
Empty
Hard Gelatin Capsule
